Chassis Mount Products

Deerskin Animal Control handcrafts all of their products for the highest quality products for our customers.  


See specifications and products below: ACCM, Carcas Collection Units, & ProSafety Units.


                                Contact us for a Quote Today!

Animal Control Units

ACCM4

.

ACCM4G Will Fit Chevy, Ford, Dodge; SW Bed Only

  • Overall Dimensions: 78″ wide, 52″ tall overall, 75″ long
  • Front Storage Compartment: 20″ wide, 26″ tall, 78″ deep

Animal Compartments:

  • Street Side: Center 25″W x 26″H x 39″Deep
  • Rear: 25″W x 34″H x 39″Deep
  • Curb Side: Center 25″W x 26″H x 39″Deep
  • Rear: 25″W x 34″H x 39″Deep

4 Compartment Chassis Mount

Construction:

  • Basic frame is 2″ x 2″ welded steel tubing with a Superstructure of 1″ x 1″ welded steel tubing
  • All steel is hot dipped galvanized before covering
  • The ceiling contains 4″ foam insulation and 1” in the front wall and floor and between each compartment
  • The rear wall has 2” foam insulation
  • The insulation is to provide a 15-20 degree cooler temperature within each animal compartment
  • Units are waterproof, corrosion resistant, and chew proof
  • The interior and exterior material is 20 gauge stainless steel
  • The interior ceilings consist of .050 aluminum with a roof of 1/8″ aluminum diamond plate
  • Doors are made with 12 gauge stainless steel and hinged from the front with a continuous stainless steel hinge
  • All doors have positive locking tee handles, keyed alike
  • Doors have adjustable louvered aluminum vents with perforated inside grilles
  • Storage compartment floors are carpeted
  • The storage compartment doors are solid (with no vents)
  • Units are equipped with LED marker lights, LED stop and tail lights, LED dual backup lights, and four way flashers
  • The body is mounted to the vehicle frame with eight (8) angle brackets
  • Interior LED Light in each compartment
  • Swinging partitions are installed in compartments and opened to create a pass through compartment between each side of the unit.
  • 12 Volt Exhaust Fan–The fan is installed in the roof of the unit to exhaust heat from each compartment. Each fan is 800 CFM which exceeds manufactures rating.

.

***OPTIONAL EQUIPMENT***

  • Backup Alarm-Whelen Model #WBUA97
  • Secondary Safety Doors–These doors are located inside the primary door and are constructed of 125 aluminum with ¾” holes punched for ventilation and a catch pole cutout.
  • One Way Safety Doors-These doors are located inside the primary door and are constructed of 1X2 aluminum. Each one way door will have two(2) spring loaded 125 aluminum panels to ease loading but still prevent escape until one way door is opened. Each one way door is equipped with positive latches and ¾” holes punched for ventilation.
  • Top Luggage Rack-This rack is installed on top of unit for additional storage. The rack is constructed of 1 ½ X 1 ½ square aluminum tubing welded.
  • Emergency Strobe-Whelen Model #R2LPHDA- measures 17” long and 3″ high and 7” wide with (6)LIN6 Super LED Modules in amber with dash mounted switches.
  • Air Conditioning System-Red Dot Model R-6100 Unit is 20,000 BTU with add on compressor to truck engine. (Rangers, S-10’s, Toyotas, etc are not adaptable to brackets for added compressors.)
  • Auxiliary Heating-Red Dot Model R-254-4- A 20,000 BTU directional air louvered heater.
  • Patio Storage Bumper-The bumper is constructed of steel and is 82″ long and 15″ wide, painted with automotive polyurethane paint, and has a storage compartment in the center.
  • Step Bumper-The bumper is constructed of stainless steel and is 82” long and 6” wide.
  • Rubber Mats-Constructed of  ½” thick, chew proof rubber mats to fit the floor of the compartment.
  • Rear Flood Lights (2) 4 X 6 LED floodlights mounted on the rear of the unit.
  • Dead Animal Pan-This is available to fit the rear compartments only. It is constructed of aluminum and has four raised sides and handles on each end can be fitted in the rear compartments for loading dead animals.
  • Pet Step-Constructed of polypropylene, with a size of 70” L (35” L when folded) X 18” W with universal rubberized grips to fit any vehicle.
  • Deerskin Lift System-Slide out cage housed in curb side front compartment to assist in lifting large animals. Powered by an 1800# 12 volt, cable winch, the cage lowers to curb height  and is capable of lifting 200 pounds.
  • Dead Animal Box with Lift Gate-Located in the rear center of the unit, with a electric lift gate capable of lifting 1000 pounds.
  • Directional Light Bar-Whelen Model# TAM85-6 Lamp Super LED traffic advisor 47″ Long, located on the rear of the unit, placed at center top to advise traffic of the vehicles location.
  • Door Checks-Mounted inside the cage attached to the primary door, used to hold the door in open position while loading/unloading animals.
  • Digital Thermometer-Mounted on dash of truck with the probe located inside animal unit to monitor temperature while vehicle is in use.
  • Rear Observation Camera 5.6 inch LCD-TFT high resolution color monitor. Monitor has two audio/video inputs and a versatile mounting bracket. The high resolution reverse-image color camera has a 130 degree (diagonal) wide angle lens and 1-lux low light capability. It is water proof, includes an anti-glare sun shield, and one-way audio (from Camera to monitor). The Panasonic image sensor’s resolution is rated at 380 lines and it is made of die-cast aluminum.

ACCM6

.

ACCM6G To Fit Chevy, Ford, Dodge; (56” cab to axle-¾ Ton Vehicle Recommended)


Overall Dimensions: 80″ wide, 52″ tall overall, 106″ long

Storage Compartment: 22″ wide, 35″ tall, 80″ deep

Animal Compartments

Street Side: Front  28″W x 35″H x 40″Deep

Center 25″W x 26″H x 40″Deep

Curb Side: Front  28″W x 35″H x 40″Deep

Center 25″W x 26″H x 40″Deep


6 Compartment Chassis Mount

Construction:

  • Basic frame is 2″ x 2″ welded steel tubing with a Superstructure of 1″ x 1″ welded steel tubing
  • All steel is hot dipped galvanized before covering
  • The ceiling contains 4″ foam insulation and the front, back and bottom contain 1″ foam insulation to provide a 15-20 degree cooler temperature within each animal compartment
  • Units are waterproof, corrosion resistant, and chew proof
  • The interior and exterior material is 20 gauge stainless steel
  • The ceilings consist of .050 aluminum with a roof of 1/8″ aluminum diamond plate
  • Doors are made with 12 gauge stainless steel and hinged from the front with a continuous stainless steel hinge
  • Doors have positive locking tee handles, keyed alike
  • Doors have adjustable louvered aluminum vents with perforated inside grilles
  • Storage compartment floors are carpeted
  • The storage compartment doors are solid (with no vents)
  • Units are equipped with LED marker lights, LED stop and tail lights, LED dual backup lights, and four way flashers
  • The body is mounted to the vehicle frame with eight (8) angle brackets
  • 12 Volt Exhaust Fan, 800 CFM-The fan is installed in the roof of the unit to exhaust heat from each compartment
  • Interior Lights–An LED interior light is installed in each compartment with all switches mounted on the dash of the vehicle
  • 3-Swinging Partition-Swinging partitions are installed in compartments and opened to create a pass through compartment between each side of the unit.

.

***Optional Equipment***

  • Backup Alarm-Whelen Model #WBUA97
  • Secondary Safety Doors–These doors are located inside the primary door and are constructed of 125 aluminum with ¾” holes punched for ventilation and a catch pole cutout.
  • One Way Safety Doors-These doors are located inside the primary door and are constructed of 1X2 aluminum. Each one way door will have two(2) spring loaded 125 aluminum panels to ease loading but still prevent escape until one way door is opened. Each one way door is equipped with positive latches and ¾” holes punched for ventilation.
  • Top Luggage Rack-This rack is installed on top of unit for additional storage. The rack is constructed of 1 ½ X 1 ½ square aluminum tubing welded.
  • Emergency Strobe-Whelen Model #R2LPHDA- measures 17” long and 3″ high and 7” wide with (6)LIN6 Super LED Modules in amber with dash mounted switches.
  • Air Conditioning System-Red Dot Model R-6100 Unit is 20,000 BTU with add on compressor to truck engine. (Rangers, S-10’s, Toyotas, etc are not adaptable to brackets for added compressors.)
  • Auxiliary Heating-Red Dot Model R-254-4- A 20,000 BTU directional air louvered heater.
  • Patio Storage Bumper-The bumper is constructed of steel and is 82″ long and 15″ wide, painted with automotive polyurethane paint, and has a storage compartment in the center.
  • Step Bumper-The bumper is constructed of stainless steel and is 82” long and 6” wide.
  • Rubber Mats-Constructed of  ½” thick, chew proof rubber mats to fit the floor of the compartment.
  • Rear Flood Lights (2) 4 X 6 LED floodlights mounted on the rear of the unit.
  • Dead Animal Pan-This is available to fit the rear compartments only. It is constructed of aluminum and has four raised sides and handles on each end can be fitted in the rear compartments for loading dead animals.
  • Pet Step-Constructed of polypropylene, with a size of 70” L (35” L when folded) X 18” W with universal rubberized grips to fit any vehicle.
  • Deerskin Lift System-Slide out cage housed in curb side front compartment to assist in lifting large animals. Powered by an 1800# 12 volt, cable winch, the cage lowers to curb height  and is capable of lifting 200 pounds.
  • Dead Animal Box with Lift Gate-Located in the rear center of the unit, with a electric lift gate capable of lifting 1000 pounds.
  • Directional Light Bar-Whelen Model# TAM85-6 Lamp Super LED traffic advisor 47″ Long, located on the rear of the unit, placed at center top to advise traffic of the vehicles location.
  • Door Checks-Mounted inside the cage attached to the primary door, used to hold the door in open position while loading/unloading animals.
  • Digital Thermometer-Mounted on dash of truck with the probe located inside animal unit to monitor temperature while vehicle is in use.
  • Rear Observation Camera 5.6 inch LCD-TFT high resolution color monitor. Monitor has two audio/video inputs and a versatile mounting bracket. The high resolution reverse-image color camera has a 130 degree (diagonal) wide angle lens and 1-lux low light capability. It is water proof, includes an anti-glare sun shield, and one-way audio (from Camera to monitor). The Panasonic image sensor’s resolution is rated at 380 lines and it is made of die-cast aluminum.

ACCM8

.

ACCM8G To Fit Chevy, Ford, Dodge; 8’ Bed Only-56” cab to axle (3/4 ton recommended)

  • Overall Dimensions: 80″wide, 52″ tall overall, 106″ long
  • Storage Compartment: 25″ wide, 8″ tall, 80″ deep

Animal Compartments

Street Side:  

  • Front 25″W x 35″H x 40″ Deep
  • Center 25″W x 26″H x 40″ Deep
  • Center 25″W x 26″H x 40″ Deep
  • Rear 25″W x 26″H x 40″ Deep

Curb Side:  

  • Front 25″W x 35″H x 40″ Deep
  • Center 25″W x 26″H x 40″ Deep
  • Center 25″W x 26″H x 40″ Deep
  • Rear 25″W x 26″H x 40″ Deep

8 Compartment Chassis Mount

Construction:

  • Basic frame is 2″ x 2″ welded steel tubing with a Superstructure of 1″ x 1″ welded steel tubing
  • All steel is hot dipped galvanized before covering
  • The ceiling contains 4″ foam insulation and 1” in the front wall and floor and between each compartment. The rear wall has 2” foam insulation. The insulation is to provide a 15-20 degree cooler temperature within each animal compartment
  • Units are waterproof, corrosion resistant, and chew proof
  • The interior and exterior material is 20 gauge stainless steel
  • The interior ceilings consist of .050 aluminum with a roof of 1/8″ aluminum diamond plate
  • Doors are made with 12 gauge stainless steel and hinged from the front with a continuous stainless steel hinge
  • All doors have positive locking tee handles, keyed alike
  • Doors have adjustable louvered aluminum vents with perforated inside grilles
  • Storage compartment floors are carpeted
  • The storage compartment doors are solid (with no vents)
  • Units are equipped with LED marker lights, LED stop and tail lights, LED dual backup lights, and four way flashers
  • The body is mounted to the vehicle frame with eight (8) angle brackets
  • 12 Volt Exhaust Fan, 800 CFM–The fan is installed in the roof of the unit to exhaust heat from each compartment
  • Interior Lights-An LED interior light is installed in each compartment with all switches mounted on the dash of the vehicle
  • 4-Swinging Partition-Swinging partition is installed in compartments and opened to create a pass through compartment between each side of the unit

.

***OPTIONAL EQUIPMENT***

  • Backup Alarm-Whelen Model #WBUA97
  • Secondary Safety Doors–These doors are located inside the primary door and are constructed of 125 aluminum with ¾” holes punched for ventilation and a catch pole cutout.
  • One Way Safety Doors-These doors are located inside the primary door and are constructed of 1X2 aluminum. Each one way door will have two(2) spring loaded 125 aluminum panels to ease loading but still prevent escape until one way door is opened. Each one way door is equipped with positive latches and ¾” holes punched for ventilation.
  • Top Luggage Rack-This rack is installed on top of unit for additional storage. The rack is constructed of 1 ½ X 1 ½ square aluminum tubing welded.
  • Emergency Strobe-Whelen Model #R2LPHDA- measures 17” long and 3″ high and 7” wide with (6)LIN6 Super LED Modules in amber with dash mounted switches.
  • Air Conditioning System-Red Dot Model R-6100 Unit is 20,000 BTU with add on compressor to truck engine. (Rangers, S-10’s, Toyotas, etc are not adaptable to brackets for added compressors.)
  • Auxiliary Heating-Red Dot Model R-254-4- A 20,000 BTU directional air louvered heater.
  • Patio Storage Bumper-The bumper is constructed of steel and is 82″ long and 15″ wide, painted with automotive polyurethane paint, and has a storage compartment in the center.
  • Step Bumper-The bumper is constructed of stainless steel and is 82” long and 6” wide.
  • Rubber Mats-Constructed of  ½” thick, chew proof rubber mats to fit the floor of the compartment.
  • Rear Flood Lights (2) 4 X 6 LED floodlights mounted on the rear of the unit.
  • Dead Animal Pan-This is available to fit the rear compartments only. It is constructed of aluminum and has four raised sides and handles on each end can be fitted in the rear compartments for loading dead animals.
  • Pet Step-Constructed of polypropylene, with a size of 70” L (35” L when folded) X 18” W with universal rubberized grips to fit any vehicle.
  • Deerskin Lift System-Slide out cage housed in curb side front compartment to assist in lifting large animals. Powered by an 1800# 12 volt, cable winch, the cage lowers to curb height  and is capable of lifting 200 pounds.
  • Dead Animal Box with Lift Gate-Located in the rear center of the unit, with a electric lift gate capable of lifting 1000 pounds.
  • Directional Light Bar-Whelen Model# TAM85-6 Lamp Super LED traffic advisor 47″ Long, located on the rear of the unit, placed at center top to advise traffic of the vehicles location.
  • Door Checks-Mounted inside the cage attached to the primary door, used to hold the door in open position while loading/unloading animals.
  • Digital Thermometer-Mounted on dash of truck with the probe located inside animal unit to monitor temperature while vehicle is in use.
  • Rear Observation Camera 5.6 inch LCD-TFT high resolution color monitor. Monitor has two audio/video inputs and a versatile mounting bracket. The high resolution reverse-image color camera has a 130 degree (diagonal) wide angle lens and 1-lux low light capability. It is water proof, includes an anti-glare sun shield, and one-way audio (from Camera to monitor). The Panasonic image sensor’s resolution is rated at 380 lines and it is made of die-cast aluminum.

Carcass Collection Body

Specifications

  • Outside Dimensions: 102” Long x 80” Wide x 46” High
  • Inside Dimensions: 76” Wide x 42” High

Construction: 

  • Framing is 2” galvanized steel tubing
  • Inside Body Lining: Floor is constructed of 12 gauge stainless steel. Walls and ceiling are constructed of 20 gauge stainless steel.
  • Walls of body are insulated with 2” foam board insulation
  • Outside Body is constructed of .080 White Aluminum
  • Roof is constructed of 125 Diamond Plate Aluminum
  • Underbody is reinforced to withstand the stress imposed by dumping

Construction: Doors 

  • Dimensions: 38” Wide (each door)
  • Doors constructed of 2×2 galvanized steel tubing frame
  • Interior of doors are 20 gauge stainless steel
  • Exterior of doors are .080 White Aluminum
  • Doors have a 2 point dead bolt latch
  • Doors must open a full 270 degrees and be designed so they can be secured to the side of the truck body when dumping
  • Doors will be completely hermetically sealed (airtight) when closed.

Tool/Storage Box 

  • Dimensions of storage box are 16” Wide x 16” High x Through Body
  • Constructed of 11 gauge Stainless Steel
  • Tool Box has locking paddle handles

Carcass Winch 

  • Mounted inside of box (forward) on ceiling
  • Moves along track to bring from forward of box to back
  • 12 Volt DC Electric with remote switch

Dump Hoist 

  • Venco Conversion Hoist for body

Lighting 

  • All DOT Required Lighting; Lighting will be LED
  • 2-Low Profile Type, Amber, Rotating Strobes mounted on the top, rear corners of the body with brush guards. Whelen Strobe #L-32 with guard
  • Directional LED Light Bar to be mounted on the rear of body between the strobe lights. Whelen #TAM85
  • Required Red/White reflective tape on rear doors

Water 

  • Five gallon water tank constructed of aluminum installed on PS of body, at front underneath. Has access door in skirt panel to allow access to fill without lifting dump body.

Fuel Fill 

  • Access door on Driver Side of body at front underneath. Located in skirt panel to allow filling of fuel without lifting dump body.

Drain Trough 

  • Located at the rear of the body. Trough is 2” wide x 1 ½” deep
  • Waste tank installed below trough with ball valve

Mounting 

  • Body shall be attached with “L” type brackets secured with stainless steel bolts, washers and lock nut fasteners.
  • Aluminum Fenders Installed

More Photos - Carcass Collection

Pro-Safety